RAM Mount Tough Dock for Getac B300 - Manual

GET2 Tough Dock User Guide for Getac B300
National Products, Inc., 8410 Dallas Ave South, Seattle, WA 98108, (206) 763-8361 www.rammount.com
The purpose of this document is to help you operate and troubleshoot your Toughdock.
Please contact us or your local RAM re-seller for further assistance if needed.
LED'S:
POWER SWITCH:
Switched ON:
Switched OFF:
* Power IN: Indicates 12-28vdc is supplied to Toughdock.
(Toughdock draws 3 amps from a 13.8V source to power
Toughdock and laptop)
* Power OUT: Indicates 19vdc is available for laptop.
* Power is supplied to laptop and Port
Replicator from external source.
* If laptop is ON and docked, laptop
will supply power to Port Replicator.
Operation
1. Place laptop on Toughdock, front edge first. Then use brass locating pins to align back edge.
2. Pull latch forward until lock engages. Turn lock clockwise to lock; counter clockwise to release.
Keys are coded to lock.
Use of wrong keys may damage lock.
RMR-INS-234-GET2_rev2
Latch Lock
(SINGLE PASS THROUGH RF ONLY)