RAM Mount RAM-VB-177-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side where seat frame legs meet
the floor board.
Drilling Required
No - requires longer bolts and stand offs
provided in kit.
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Purchased Separately
Weight
4.5 lbs.
Dimensions
A = 17.63", B = 8.21", C = 1.18"
Hole Center = 10.75"
Features
Shown In Use
RAM-VB-177
Misc.
Installs with no drilling required
Minimal intrusion into passenger leg space
Rock solid construction
Lifetime warranty
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-177
DODGE AVENGER (2007-2010)
DODGE CALIBER (2007-2009)