RAM Mount RAM-VB-158-SW1 - Manual

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
National Products, Inc.
Phone: 206-763-8361
Fax: 206-763-9615
Address: 1205 S Orr St
Seattle, WA 98108
Website: www.ram-mount.com
Email: [email protected]
Vehicle base for the
SPECIFICATIONS
Placement
Passenger side on the floor, where seat
frame meets the floor board.
Drilling Required
No - uses existing seat bolts
Seat Configuration
Bucket
Construction/Finish
Steel/Black Powdercoat
Pole or Pedestal
Purchased Separately
Weight
3.8 lbs.
Dimensions
A = 11.875", B = 8.25", C = 14.375"
Hole Center = 10.625"
Features
Shown In Use
RAM-VB-158
Misc.
Installs in minutes with no drilling required
Won’t interfere with passenger leg space
Rock solid construction
Lifetime warranty
RAM No-Drill
TM
Seat Bases
National Products, Inc.
Item Number
RAM-VB-158
JEEP WRANGLER (1997-2006)