Baron Air & Fuel_MIKUNI CARBURETOR ADAPTER - For Harley® Motorcycles User Manual
Baron For motorcycles
Page: 1
LA-2890-00
MIKUNKI CARBURETOR ADAPTER -HARLEY BAK
CAUTION! We Strongly recommend that a qualified Technician install this
product should you not fully understand the instructions prior to starting the
install. For questions contact our tech dept. via email or phone # listed below.
Revision: 1.4 - 04/22/2010
INCLUDED IN THE KIT:
(1) Mikuni Adaptor
(3) 1/4-20x5/8"socket Head Screws
(1) O Ring
TOOLS REQUIRED:
medium or stronger thread locker
3/16 allen wrench
INSTRUCTIONS:
1. Push adapter onto the Mikuni HSR 42 or 45 Carb until it sits flush.
2. Align screw holes with the holes in your air kit backing plate.
3. Secure the backing plate using the (3) 1/4-20x5/8 socket head screws and plenty of thread locker.
NOTE: Carberator must be securely mounted to motorcycle via breather assembly or a support bracket.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. LA Choppers bears no responsibility on installation costs associated with this product.
© 2013 LA Choppers
5221 Oceanus Drive
Huntington Beach, CA 92649
(925)583-2499 - Ph.
(714)901-0520 - Fax
www.lachoppers.com