Baron Chrome Shop_SIDE MOUNT LICENSE BRACKET - Vulcan 1500_1600 - Manual

Page: 1 BA-3173-00
Side-Mount License Bracket
Please read ALL of the instructions BEFORE beginning the installation
Revision: 1.1 - 02/19/2010
INCLUDED IN THE KIT:
Chrome Side-Mount Bracket M10 chrome washer
INSTRUCTIONS:
We recommend the use of blue Loctite or other thread lock agent on all fasteners.
1. Remove the lower acorn nut and washers from left shock.
2. Install new Side-Mount Bracket onto stud so tab on bracket is stopped by shocks lower ring, and flange with
three threaded holes faces to the left.
3. Install the supplied M10 washer first, then replace acorn nut and washer - torque to 47 ft-lbs.
4. You may now mount your Baron side mount license/taillight assembly (part number BA-3103-00) per
instructions supplied with that kit.
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]