Baron Tachometers_TACHOMETER ADAPTER - Manual

Page: 1 BA-7315-50
TACHOMETER ADAPTER (Single Fire)
CAUTION! We Strongly recommend that a qualified technician install this kit
if you do not completely understand the instructions prior to the install.
Revision: 3.9 - 02/03/2010
INCLUDED IN THE KIT:
(1) Baron 3-wire Tach Adapter
(3) Piggy-back Connectors
(3) Scotch-Loc Connectors
(3) Spade Connectors
(1) Butt Connector
(1) Ring Terminal
TOOLS REQUIRED:
Crimp tool (or std. pliers)
Needle-nose Pliers
Wire Strippers
Electricians Tape
Factory Service Manual
INSTRUCTIONS:
Note: This part may also work with other manufactures tachometers, although we cannot guarantee its
functionality unless it is used with a Baron Tach.
TACH ADAPTER KNOWN FITMENT
We have tested this adapter and determined:
IT IS REQUIRED ON All 2004 - 2010 HARLEY DAVIDSON models, YAMAHA V-Star 950 & 1300,
2008-2010 Road Star, Warrior, Roadliner, Stratoliner, Raider, HONDA VTX1800 , KAWASAKI VN900 &
VN2000, SUZUKI C50 & C90
Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or
fitment may be required. Barons bears no responsibility on installation costs associated with this product.
© 2013 Barons Custom Accessories
5221 Oceanus Drive Huntington Beach, CA 92649 (925)583-2499 - Ph. (714)901-0520 - Fax www.baronscustom.com [email protected]