Wilwood Brake & Clutch Pedal Description - Manual (Page 2)

General Information and Assembly Instructions
Installation of this component should ONLY be performed by persons experienced in the installation and proper operation of disc brake
systems. Before assembly begins, familiarize yourself with the following procedure to ensure a trouble-free installation.
Features:
•Lightweight construction, only 3.7 pounds.
•High strength computer design.
•Includes brake balance bar.
•Brake and clutch pedal have 6.25:1 ratio.
•High strength steel master cylinder mounting studs.
•Easy mounting location.
•Non-slip pedals.
•Fully anodized finish.
•Finest quality hardware.
•Use with Wilwood composite or combination master cylinders.
Installation Instructions:
•Wilwood’s forward mount dual pedal assembly must be mounted using the four
outboard tab mounting holes. Attach the pedal assembly to two sturdy beams or
plates with four 5/16 inch bolts. Pedal assembly must be rigidly attached to frame
and not deflect under heavy pedal forces. Pedals must be free from obstructions
over their entire range of motion. Allow enough space so balance bar adjustments
can be made and masters cylinders are accessible.
.344 DIA THRU
4 PLACES
1/4-20 THD
x .88 DP
2 PL
1.06
(26,9)
5/16-24 THD
STUD
6 PLACES
11.88 R
(301,8)
2.25 (57,2)
.44 (11,2)
.88
(22,4)
.50 (12,7)
2.25
(57,2)
7.50 (190,5)
2.75 (69,9)
2.62 (66,6) 2.62 (66,6)
2.62 (66,6)
1.44
(36,6)
.50 (12,7)
4.62
(117,3)
3.00
(76,2)
8.50 (215,9)
.31
(7,9)
Part No. 340-3950
(Shown w/Master Cylinders)
Forward Mount Dual Pedal Assembly, Physical Dimensions, 6.25:1 Ratio (P/N 340-3950)
Page 2