Exploded assembly diagram, Important notice - read this first, Photographic tip – Wilwood TC6R Big Brake Truck Front Brake Kit User Manual

Page 2

Advertising
background image

Exploded Assembly Diagram

66

P

IS

T

O

N

PIS

T

ON

11

10

10

12

13

14

4

1

9

8

3

2

GT ASYMMETRICAL
GROOVE PATTERN
ROTOR

EXISTING
HUB
ASSEMBLY

5

7

6

SRP ROTOR

Figure 1. Typical Installation Configuration

WARNING

INSTALLATION OF THIS KIT SHOULD ONLY BE
PERFORMED BY PERSONS EXPERIENCED IN
THE INSTALLATION AND PROPER OPERATION
OF DISC BRAKE SYSTEMS.

NOTE

SPECIFIC PARTS MAY VARY FROM DIAGRAM

Important Notice - Read This First

Before any tear-down or disassembly begins, review the following information:
• Review the wheel clearance diagram (figure 2, page 3) to verify that there is adequate clearance with the

wheels you will be using with the installation.

• Front brake kits do not include flex lines. OEM brake lines will not adapt to Wilwood calipers. Check the

assembly instructions, or associated components section for brake line recommendations before assembly.
In addition, Wilwood offers an extensive listing of brake lines and fittings on our web site:

www.wilwood.com

.

• Due to OEM production differences and other variations from vehicle to vehicle, the fastener hardware and

other components in this kit may not be suitable for a specific application or vehicle.

• It is the responsibility of the purchaser and installer of this kit to verify suitability / fitment of all components

and ensure all fasteners and hardware achieve complete and proper engagement. Improper or inadequate
engagement can lead to component failure.

• 2007 - present spindles may require light machining with a grinder to smooth parting line edge at original

caliper mount ears in order for the Wilwood caliper bracket to fit. Please see figure 4, page 3 for instructions.
Before assembly, examine the necessity of this modification by inspecting the spindle and bracket interface
and your ability to perform this modification before assembling any parts.

Page 2

Photographic Tip

Important and highly recommended: Take photos of brake system before disassembly and during the disassembly process. In the
event, trouble-shooting photos can be life savers. Many vehicles have undocumented variations, photos will make it much simpler for
Wilwood to assist you if you have a problem.

Advertising