Electronics 190-AC - Manual

* MODEL 190 MagnaValve *
ELECTRONICS INCORPORATED
SHOT PEENING CONTROL TECHNOLOGY
* Normally closed
* 300 lbs./min.
* 110 Vac or
* 24 Vdc
The Model 190 MagnaValve is a normally closed magnetic valve typically used
to replenish shot hoppers with cast steel shot or cut wire shot.
The valve construction includes a permanent magnet for normally closed
operation and an electromagnet to activate shot flow. By applying power to the
electromagnet, a full flow condition may be achieved. When power is off, the
valve will hold shot due to the permanentmagnet.
190_ac_dcDATA.CDR 02/02/2004
* On - Off Valve
* No moving parts
* No air cylinders
* Steel shot/grit
* Fail Safe permanent
Magnet construction
Preliminary