Electronics 100 User Manual
Model 100 magnavalve
* MODEL 100 MagnaValve *
* MODEL 100 MagnaValve *
ELECTRONICS INCORPORATED
ELECTRONICS INCORPORATED
SHOT PEENING TECHNOLOGY
* Wheel systems
* Variable flow rates
* No moving parts
* Steel shot
* Steel grit
* 0 - 2400 lbs/min range
* Normally closed
* Manual-open loop
systems
The Model 100 MagnaValve is a normally closed magnetic valve suitable for regulation of
steel shot or grit. Used with the Model MC or 102 Power Pak the MagnaValve will provide
accurate and repeatable flow rates over a 0 - 2400 pounds-per-minute flow range.
For closed loop amperage control using 100:5 current transformer you may use model FC
amperage control. This provides closed-loop servo action with low flow alarms.
The valve construction includes a permanent magnet for normally closed operation and an
electromagnet for controlling shot flow rates. By regulating the voltage to the electromagnet,
any desired flow rate may be achieved. When power is off, the valve will hold shot due to the
permanent magnet. .
100DATA.CDR 02/22/2003
www.shotpeener.com