Speedhut 2007-2012 Chevrolet Silverado_Duramax (GMC Sierra_Duramax) Pillar User Manual
Speedhut For the car
STEP ONE: Remove stock pillar.
-Screw is located under the cap at the top of the pillar.
STEP TWO: Install gauges in new “replacement” pillar.
STEP THREE: Tape or secure gauge wiring to back of new pillar.
STEP FOUR: Install new pillar in Truck.
STEP FIVE: Use provided screw to hold new pillar in place.
- Don’t over tighten the screw.
www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460
Models #17115, #17116, #17117, and #17118 (needs screw)
STEP ONE: Remove stock pillar.
-Screw is located under the cap at the top of the pillar.
STEP TWO: Install gauges in new “replacement” pillar.
STEP THREE: Tape or secure gauge wiring to back of new pillar.
STEP FOUR: Install new pillar in Truck.
STEP FIVE: Use provided screw to hold new pillar in place.
- Don’t over tighten the screw.
www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460
Models #17115, #17116, #17117, and #17118 (needs screw)
Gauge Pod
Installation Instructions: 07+ Chevy/GMC Pillar
Gauge Pod
Installation Instructions: 07+ Chevy/GMC Pillar