Speedhut 2003-2009 Dodge Ram and 2010-2012 Dodge Ram Pillar User Manual
Speedhut For the car
STEP ONE: Remove stock pillar.
STEP TWO: Install gauges in new pillar.
STEP THREE: Tape or secure gauge wiring to back of new pillar.
STEP FOUR: Install new pillar in place of old pillar.
STEP FIVE: Use provided screw to hold new pillar in place:
- Make sure screw is aligned with factory hole to avoid cross threading.
- Don’t over tighten the screw.
www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460
Models #17212, #17213 is designed to fit 2003+ Dodge Ram (1 long bolt)
Models #17218, #17219 designed to fit 2010+ Dodge Ram (1 short bolt)
STEP ONE: Remove stock pillar.
STEP TWO: Install gauges in new pillar.
STEP THREE: Tape or secure gauge wiring to back of new pillar.
STEP FOUR: Install new pillar in place of old pillar.
STEP FIVE: Use provided screw to hold new pillar in place:
- Make sure screw is aligned with factory hole to avoid cross threading.
- Don’t over tighten the screw.
www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460
Models #17212, #17213 is designed to fit 2003+ Dodge Ram (1 long bolt)
Models #17218, #17219 designed to fit 2010+ Dodge Ram (1 short bolt)
Gauge Pod
Installation Instructions: Dodge Ram Pillar
Gauge Pod
Installation Instructions: Dodge Ram Pillar