Speedhut 2-1_16” GPS - LED Lighting - Manual (Page 2)

Speedometer operation
Plug peak recall button in back of GPS speedometer. Press and hold peak recall button down to recall peak.
To clear peak , release button while displaying peak and then immediately press and release button again for a
to clear it.
Peak Recall operation
Pointer will stay at 0mph and oscillate slightly at zero to indicate the GPS is acquiring satellites. GPS is not yet
functional to indicate speed.
Once Satellites are acquired (15-45 seconds) , the pointer will swing full scale and then back toward 0mph to
indicate it is now ready for operation.
WARRANTY - Speedhut inc. warrants to the consumer for a period of 5 years from the date of purchase that the product will be free from defects in materials or workmanship.
Speedhut warrants to the consumer for a "LIFE-TIME" that the gauge circuit board will be free from defects in materials or workmanship. Please contact Speedhut service dept.
If you have a problem with this gauge. [email protected]