Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Nissan (Skyline GT-S and GT-R: R32, R33, R34, R35 – excluding R32GTS-t) - Manual

1
------------------------------------------------------------------------------------------------------------------------
IMPORTANT NOTES:
• Please thoroughly read and understand these instructions before commencing this installation.
• The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to an AN#3 fitting if desired.
• The Nissan GTR series requires 2 Dual Port BOV kits to replace the 2 standard Bypass valves. Each BOV kit is sold
separately.
RECOMMENDATIONS
•
Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician
• Turbosmart recommends that a boost gauge be permanently fitted to the vehicle
------------------------------------------------------------------------------------------------------------------------
HOW TO INSTALL YOUR BOV
Please check that the following items have been provided in your Skyline Dual port kit.
Quantity Description Use
1 Skyline Dual port BOV Model Specific blow off valve
1 Port Blanking plug To blank off a port to convert the BOV to full atmospheric or plumb back
2 6mm Hose clamps To secure the vacuum lines to the BOV and the engine
1 400mm of 6mm Silicone vacuum line To connect vacuum source to the BOV
Installation on a R35 GTR
1) Remove the two standard BOV’s by removing the securing bolts, plumb back hose and vacuum source.
2) Install the Dual Port BOV’s using the standard bolts. Remember to put in the provided gaskets between the flange and the
BOV. Replace the plumb back hose and secure with the standard clamp.
Product Name: Skyline Dual port
Product Description: Fits Skyline GTS-t R33- R34,
Skyline GT-T R34, Skyline GTR R32 – R34, GTR R35
Product Number:
TS-0205-1026
Remove standard
BOV’S
Left side BOV Right side BOV