Turbosmart BOV ADAPTERS - Subaru Liberty (Legacy) B4 User Manual
Page 2
SUBARU LIBERTY B4 BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia
Ph: +61(2) 9798 2866
Fax: +61 (2) 9798 2826
Email:
USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA
Ph: (760) 727 7610
Fax: (760) 727 7963
Email:
PART NUMBER
FG-ADM-LBB4
Step 6. Remove original BOV vacuum line system.
Step 7. Remove the white plastic reducer
Step 8. Refit the white plastic reducer between the two
hoses as shown below.
Step 9. Fit your Turbosmart blanking plug to the
factory return hose using the factory hose clamp.
(If
you are installing a Type III Dual Port or a Plumb Back, do
not blank off the return hose, you will be attaching this hose
to the plumb-back fitting on the BOV.)
White Plastic Reducer
Original BOV Vacuum System
REMOVE
White Plastic Reducer
Plumb-back
fitting here