Turbosmart WASTEGATES – EXTERNAL - Ultra-Gate38 (with locking ring) - Manual (Page 3)

www.TURBOSMARTONLINE.com
3
MOUNTING
For the best results, an attempt should be made, if space allows, to mount the Ultra-Gate38 at an angle to the exhaust flow to allow for
better flow. See the schematic diagrams below for examples of mounting positions.
SPARE PARTS AND ACCESSORIES LIST
TS-0501-2001: WG38 Weld flanges - stainless
TS-0501-2002: WG38 Weld flanges - Mild Steel
TS-0501-3002: WG38 flange gaskets - Stainless, 2 Pk
TS-0501-3103: WG38 Valve seat
TS-0505-3006: WG38/40/45 Diaphagm assembly
TS-0505-3007: 74mm Locking collar
TS-0505-3008: 74mm Collar tool
TS-0505-3009: 1/16TH NPT - 6mm barb vacuum fittings
TS-0505-2007: 1/16TH NPT - 1/8 NPT Female fittings
TS-0505-2008: 1/16TH NPT - -3AN Flare fittings
TS-0505-2009: 1/16TH NPT - -4AN Flare fittings
Best flow – shallow
mount angle
Good flow – slight
mount angle
Turbine
Exhaust gas flow
from engine
Exhaust gas flow
to wastegate
Wastegate
Wastegate
Turbine
Exhaust gas flow
to wastegate
Exhaust gas flow
from engine
Exhaust gas flow
from engine
Turbine
Turbine
Exhaust gas flow
from engine
Exhaust gas flow
to wastegate
Exhaust gas flow
to wastegate
Poor flow – 90
degree mounting
Not recommended – less
than 90 degree mounting