Moog Music Voyager Plug SE (VST-AU) - Manual (Page 9)

Moog Voyager PlugSE 6
MIDI
Although the main function of the MIDI button was covered above
in the MIDI Configuration section, there are more features that can
be adjusted in the MIDI Configuration panel:
When enabled, the Clock ON/OFF button synchronizes the EDITOR
with the host MIDI clock.
When enabled, the THRU button allows the host (DAW) to transmit
thru the Voyager PlugSE™ during playback.
LATENCY and DELAY
If you are using Logic Pro, make sure that the Buffer
Size matches the setting found in Logic’s Preferences
as shown on the left.
For other host applications, if you experience issues
with sync, you can adjust the delay (as shown below)
to eliminate it.
HOST
HOST allows you to send programs to the VST patch list. Select a Program you wish to save. Click HOST. You
will be presented with a dialog indicating the current host VST program selected. While this dialog is open,
click on the VST patch list and select the slot you wish to save the Voyager program to. Click OK. Go back to
the VST patch list and click on the same slot and the patch will appear.
Send
The Send button presents three options:
• Current Preset – Sends the program that is currently loaded on the Editor panel.
• FX Bank Preset – Sends the unmodified current VST program to the Voyager, allowing you to reset the
program if you return to the beginning of the son and need to undo any changes that automation may
have made to the sound.
• Send Automation preset – Sends a stream of all of the possible automation parameters to the DAW (host).