Moog Music Voyager Old School - Manual (Page 48)

Page 50
Voyager OS User’s Manual - Appendices
Page 51
Voyager OS User’s Manual - Appendices
To further enhance the functionality and appearance of the Minimoog Voyager OS, Moog Music offers the
following optional accessories. For complete information on everything listed here, including pricing and
ordering info, see your Moog dealer, or visit www. moogmusic.com
EP2 Expression Pedal
The EP2 Expression Pedal is the fi nest expression pedal available. Its smooth action gives it the feel
musicians need for precise, playable control. The heavy construction (2.5 lbs) provides a solid feel, and an
output level control allows you to adjust the expression range of the pedal.
VX-351 CV Expander
The VX-351 Voyager CV Expander provides all the CV and Gate outputs of the Voyager OS on standard 1⁄4”
interface jacks. The VX-351 connects to the Voyager’s Output Accessory Port with the included detachable
cable, turning the Voyager OS into a semi-modular synthesizer.
CP-251 Control Voltage Processor
The CP-251 Control Voltage Processor offers a number CV processing options that can be used with any
Voyager, Moogerfooger analog effects module, or other voltage-controlled gear. The CP-251 provides a dual
waveform LFO, Noise Generator, Sample-and-Hold circuit, as well as two active attenuators, a Lag Processor,
a CV Mixer and a 4-way Multiple. This combination gives you ways to modify, mix, and distribute control
voltages to produce the incredible variety of sounds and effects that analog synthesizers are famous for.
VX-351 Rack Mount Kit
The VX-351 Rack Mount Kit allows you to mount any combination of two CV Expanders or CV Processors
into a standard 19” equipment rack. The kit occupies three rack spaces (51⁄4”H). All the necessary hardware
and instructions for assembly and installation is included.
Moog FS-1 Footswitch
The FS-1 Footswitch is a heavy-duty footswitch in a steel enclosure. The switch is a momentary, normally
closed type (press to break connection) which is compatible with any of the Voyager’s footswitch inputs
(Envelope Gate, LFO Sync, and Release) or the Moogerfooger MF-105 Tap Tempo input. It has a 6’ cable
with a 1⁄4” mono phone plug attached.
Molded ATA Case for Voyager
Protection when you’re on the road. The Voyager Molded Case is designed to meet ATA specifi cations, and
is custom fi tted to the Voyager. With rugged, heavy-duty recessed wheels, and an internal compartment
large enough for storing cables and our new EP2 Expression Pedal, this case stands up to the most rigorous
touring schedules.
Appendix G - Accessories