Peerless Lighting RDMW - LED User Manual
Round 2, Direct wall-wash, Suspended
DIMENSIONS
SPECIFICATIONS
S P E C I F I C A T I O N S
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
CATALOG NUMBER
2
3
⁄
4
”
Body rotates 90%
Type:
________________________
Project:
______________________
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
5-year limited warranty. Complete warranty terms locat
Direct Wall-Wash
RDMW Round 2 LED
1
Construction
Extruded aluminum housing has diameter of 2
3
⁄
4
”.
Die-cast aluminum end caps mechanically attach
with no exposed fasteners. Die-cast rotational
device standard.
Source
Two LED lumen packages (2000 lumens, 4000
lumens) and three available color temperature
options (3000K, 3500K and 4000K).
Optics
Optical system consists of an acrylic lens and
metal reflector.
Finish
Standard finish for housing and end caps is painted
aluminum or gloss white. Consult factory for
custom colors.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimming driver rated 50,000 hours
(L
80
) at 25° C ambient temperature. Driver input
wattage is 30W for 2000 delivered-lumen package
and 60W for 4000 delivered-lumen package per
4’ section.
Specify 120V or 277V. Pre-wired with 16AWG
fixture wire. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included.
Luminaire Length
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total row
length, add 3
1
⁄
4
” per side for end cap and rotational
mechanism. Using internal joiners, 4’ and 8’
sections can be joined to form longer rows.
Environment
Damp location label option. Ambient operating
temperature O° C to 25° C.
Validation
CSA/CUS listed. Individual sections are FCC part
15 certified. LM-79 tested. Lighting Facts partner.
Warranty
Five-year limited warranty coverage includes
luminaire construction, LED light engine and driver.
Terms and conditions apply.
Packaging
100% post-consumer recycled cardboard box.
Biodegradable foam inserts and protective luminaire
bag. Recycled kraft paper tape.
Suspended
RDMW
Round 2
LED
Direct Wall-Wash
Examples:
RDMW 40L 40FT R8 277 D60 SCT LP835 F1/24 C310 LM — RDMW 20L 40FT R8 120 D30 SCT LP835 F1/18 C311
RDMW
__________
__________
_________
__________
__________ __________
__________
__________
__________
Luminaire
RDMW
Light Output
20L
2000 nominal
delivered-
lumens
40L
4000 nominal
delivered-
lumens
Luminaire
Row Length
X FT
(4’ increments)
Maximum
Section
Length
R4
4’ section(s)
R8
8’ section(s)
Voltage
120
277
Driver Type
D30 30W maximum
(2000L package)
D60 60W maximum
(4000L package)
# of Emergency
Modules
(Blank) None
1SE
1 section
2SE
2 sections
XSE
X sections
Emergency Type
1
(Blank) None
EC
Emergency circuit
Switching
SCT
Single circuit
______________
______________
______________
______________
_________________________________
LED Color Temperature
LP830 3000K 80+ CRI 16+ R9
LP835 3500K 80+ CRI 20+ R9
LP840 4000K 80+ CRI 20+ R9
Mounting Type /
F1/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/
Hard ceiling (horizontal
J-box)
Overall Suspension
2
24 24”
36 36”
48 48”
72 72”
XX XX”
Overall suspension is measured
from ceiling to bottom of luminaire
Finish
C310 Gloss white
C311 Painted aluminum
C099 Custom finish
Options
BLK
Black cord, cord manager and canopy
CP
Chicago plenum (available with F1A only)
DL
Damp location label
ELH
3
Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management without networking
MCS Matching feed canopy at support
OJB
Offset junction box
SLP
Sloped ceiling (for 10-45°, must be specified with F2 and
OJB options)
Notes:
1 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required
2 Adjustable cable gripper comes standard
3 No dimming control on emergency feed