Peerless Lighting BRM9L - LED User Manual
Bruno, Softshine i/d or direct, Suspended
lamping options
spECiFiCations
S P E C I F I C A T I O N S
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
2246 5th Street, Berkeley, CA 94710
•
Tel: 510.845.2760
•
Fax: 510.845.2776
•
•
CATALOG NUMBER
Specify by Low (LO) or High (HI)
LO
HI
Nominal Delivered Lumens*
3400
4800
Watts*
30
45
Lumen Packages:
* nominal per 4’
Type:
________________________
Project:
______________________
1
© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
5-year limited warranty. Complete warranty terms locat
I/D or Direct
BRM9L Bruno LED Softshine
Suspended
BRM9L
Bruno
LED
Softshine
I/D or Direct
BRM9L
Construction
Nominal 8
1
⁄
4
” x 1
3
⁄
4
” rectangular housing is formed
from cold-rolled steel. Die-cast end caps are
mechanically attached with no exposed fasteners.
Source
Two LED lumen packages and three available color
temperature options (3000K, 3500K and 4000K).
Optics
Softshine®-engineered optical system consists
of high performance lens, diffusers and metal
reflectors.
Finish
Finish for housing and end caps is white,
black or painted aluminum. Consult factory
for custom colors.
Controls
Optional nLight-embedded controls allow for
constant lumen management (N80) and facilitate
simple “plug-and-play” networking and control via
CAT-5e cable.
Electrical
LED light engine consists of modular LED boards
and 0-10V dimming driver rated for 50,000
hours (L
80
) at 25° C ambient temperature. Driver
input wattage is 30W for 3400 delivered-lumen
package and 45W for 4800 delivered-lumens per
4’ section. Specify 120V or 277V. Pre-wired with
16AWG fixture wire. For special circuiting or wire
gauge, consult factory. Plug-in electrical connectors
included.
Environment
Damp location label option. Ambient operating
temperature between 0° C and 25° C.
Luminaire Length
4’ and 8’ lengths in a single section for exact
suspension spacing of 4’ and 8’. For total luminaire
length, add
5
⁄
8
” for each flat end cap and 4” for each
sculptured end cap. Using internal joiners, 4’ and 8’
sections can be joined to form longer rows.
Validation
CSA/CUS listed. Individual sections are FCC part
15 certified. LM-79 tested. Lighting Facts partner.
Warranty
Five-year warranty coverage includes luminaire
construction, LED light engine, driver and optional
nLight control device. Terms and conditions apply.
Packaging
100% post-consumer recycled cardboard box and
inserts. Biodegradable, protective luminaire bag.
Recycled kraft paper tape.
__________
__________
_________
__________
__________
__________
__________
Luminaire
BRM9L
Light Output
LO
3400 nominal
delivered-lumens
HI
4800 nominal
delivered-lumens
Distribution
1
Blank Std. 70% up; 30% down
60/40 60% up; 40% down
50/50 50% up; 50% down
40/60 40% up; 60% down
30/70 30% up; 70% down
20/80 20% up; 80% down
10/90 10% up; 90% down
0/100 0% up; 100% down
Shielding
SSH Softshine®
lens
Luminaire
Row Length
X FT
(4’ increments)
Maximum
Section Length
R4
4’ section(s)
R8
8’ section(s)
Voltage
120
277
Driver Type
EZB eldoLED
dims to
black
# of
Emergency
Modules
(Blank) None
1SE
1 section
2SE
2 sections
XSE
X sections
Emergency
Type
2
(Blank) None
EC Emergency
circuit
Switching
SCT Single
circuit
______________
______________
______________
______________
_________________________________
LED Color Temperature
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP840 4000K 80+ CRI
Mounting Type /
F1/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/
Hard ceiling (horizontal
J-box)
Overall Suspension
15 15”
18 18”
24 24”
36 36”
48 48”
72 72”
XX XX”
Overall suspension is
measured from ceiling to
bottom of luminaire.
Finish
C110 Painted aluminum
(low gloss)
C210 White white (fine
textured)
C202 Black
C099 Custom finish
Options
ACG Adjustable cable gripper
BLK
Black cord, cord manager and canopy
CFG Configuration, consult factory for drawings
CP
Chicago plenum (available with F1A only)
DU
3
Dust cover
DL
Damp location label
ELH
4
Emergency through wiring w/separate feed
GLR Fusing (fast blow)
GMF Fusing (slow blow)
LM
80% lumen management without networking
MCS Matching feed canopy at support
N80 nLight-enabled control module per row/zone with 80% constant lumen management
N100 nLight-enabled control module per row/zone with NO lumen management
OJB
Offset junction box
SCEP Sculptured end caps
SLP
Sloped ceiling (for 10-45°, must be specified with F2 and OJB options)
XXXX Integrated sensor; choose options and obtain code on page 2
Notes:
1 Nominal distribution. Refer to photometric tests
for exact distribution.
2 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required
3 Dust cover not available with 0/100 distribution
4 No dimming control on emergency feed
1
3
⁄
4
”
8
1
⁄
4
”