Cobalt Digital COMPASS 9392 3G_HD_SD-SDI Dual-Channel Timecode Burn-In Inserter - Manual (Page 43)

9392-TCB-OM (V1.3) 9392-TCB PRODUCT MANUAL 3-19
Operating Instructions
Troubleshooting
9392 Card Edge Status/Error Indicators and Display
Figure 3-5 shows and describes the 9392 card edge status indicators and
display. These indicators and the display show status and error conditions
relating to the card itself and remote (network) communications (where
applicable). Because these indicators are part of the card itself and require no
external interface, the indicators are particularly useful in the event of
communications problems with external devices such as network remote
control devices.
Figure 3-5 9392 Card Edge Status Indicators and Display
93
92
4-Character Alphanumeric Display
Item Function
Display Displays 4-digit abbreviated code showing menu and submenu selections. When in a menu displaying a
parameter setting, the display shows parametric scalar value (and +/- sign where applicable).
Card Edge
Manual
Controls
This function is currently reserved.
Input Format
Indicators Three blue LEDs indicate the input signal format being received and locked onto by the 9392:
• 3G
• HD
• SD
Continuous cycling of the LEDs indicates the 9392 has not locked onto a particular format (as in the case of no
signal input).
Menu Depth
Indicators
This function is currently reserved.
RMT LED Blue LED flashes when 9392 is receiving control message from remote network control.
REF LED Blue LED illuminates when 9392 is receiving valid framesync when set up for framesync reference.
LOCK LED Blue LED illuminates when 9392 unable to lock to framesync, or unable to lock to input standard.
ERR LED This function is currently reserved.
RM
T
RE
F
ER
R
LOC
K
3G HD SD MENU DEPTH
Input Format
Indicators
Menu Depth
Indicators
Status
Indicators
Card Edge Manual Controls