Cobalt Digital COMPASS 9034 Input Processing Analog to Digital Video - Manual (Page 7)

9034-OM (V4.1) 9034 PRODUCT MANUAL 1-3
Introduction
Manual Conventions
Manual Conventions
In this manual, display messages and connectors are shown using the exact
name shown on the 9034 itself. Examples are provided below.
• Card-edge display messages are shown like this:
• Connector names are shown like this: SDI OUT
In this manual, the terms below are applicable as follows:
• 9034 refers to the 9034 Input Processing Analog to Digital Video
Converter with Audio Embedding and Frame Sync and Dolby
®
Decoding Option card.
• Frame refers to the HPF-9000, OG3-FR, 8321, or similar 20-slot
frame that houses the Cobalt
® or other cards..
• Device and/or Card refers to a COMPASS ® card.
• System and/or Video System refers to the mix of interconnected
production and terminal equipment in which the 9034 and other
COMPASS
® cards operate.
• Functions and/or features that are available only as an option are
denoted in this manual like this:
Warnings, Cautions, and Notes
Certain items in this manual are highlighted by special messages. The
definitions are provided below.
Warnings
Warning messages indicate a possible hazard which, if not avoided, could
result in personal injury or death.
Cautions
Caution messages indicate a problem or incorrect practice which, if not
avoided, could result in improper operation or damage to the product.
Notes
Notes provide supplemental information to the accompanying text. Notes
typically precede the text to which they apply.
Ch01