Cobalt Digital COMPASS 9085 Loudness Processor - Manual (Page 45)

9085-OM (V4.3) 9085 PRODUCT MANUAL 3-7
Operating Instructions
Checking 9085 Card Information
Checking 9085 Card Information
The operating status and software version the card can be checked using
DashBoard™ or the card edge control user interface. Figure 3-4 shows and
describes the 9085 card information screen using DashBoard™ and accessing
card information using the card edge control user interface.
Note: Proper operating status in DashBoard™ is denoted by green icons for the sta-
tus indicators shown in Figure 3-4. Yellow or red icons respectively indicate
an alert or failure condition. Refer to Troubleshooting (p. 3-46) for corrective
action.
Figure 3-4 9085 Card Info Utility
The Tree View shows the cards seen by
DashBoard™. In this example, Frame 1A RCVR 21
is hosting a 9085 card in slot 3.
Status Displays
These displays show the status the signal being received by the
9085. Green Settings icon shows that any changes made on
DashBoard™ are sucessfully saved on the card’s memory.
9085_CARD_INFO_ACCESS.PNG
Software Version Number
Refer to this number to check that documentation
(such as this manual) matches the card’s Software
Version Number. Use this number also when
communicating to Cobalt
® regarding this card.
Power Consumption and Temperature Displays
This display shows the power consumed by the 9085
for both the +12V and -7.5V rails, as well as key device
temperatures.