Cable connections – Cobalt Digital COMPASS 9006 Triple 3G_HD_SD Distribution Amplifier (Non-Reclocking) User Manual
Page 11
Advertising
9006 Owner’s Manual
••••
(V 1.3)
Page 11
Cable Connections
This section provides instructions for connecting cables to the installed BNC rear modules on the 8321
series frame backplane. Connect the input and output cables according to the following diagram. Split
rear module RM20-9006-B/S allow two cards to be installed in adjacent slots. B/S versions are
available in DIN1.0/2/3 and HDBNC versions.
RM20-9006-A
RM20-9006-B/S
Note:
Outputs
OUT A1
,
OUT B2,
OUT C1
and
OUT C3
are inverting. These outputs are not
compatible with ASI video.
Figure 3. BNC Designations for 9006 Rear Modules
Advertising