OMAX Variable Speed SRS - Manual

PRECISION ABRASIVE WATERJET SYSTEMS
Equipment Specifications
VS-SRS
OMAX
®
Variable Speed SRS
The programmable variable speed system
provides precise control over garnet evacuation
rate, direction, and duration to efficiently remove
garnet from the waterjet Catcher Tank.
Standard Features
• Variable Frequency Drive (VFD)
provides programmable flow rate and
direction reversal for optimal abrasive
removal
• 3/4 yard hopper that includes liner for
ease of dumping garnet from hopper
• Optimized fluid return trough minimizes
abrasive volume returning to the tank
• Suction line flushing feature
• UL, CE and CSA compliant
• Built-in GFCI protection
Electrical Requirements
• 220/240 VAC (50/60 Hz) Single
Phase 10A GFCI protected (supplied
by owner)
• Ships with a Nema 6-20 male plug
• Install according to local electrical code
Benefits
• Garnet removal rate as high as
5.6 lbs/min
• Provides an easy, economical way to
clean the Catcher Tank with minimal
time loss
• Uses only 21sq ft of floor space
• Productively removes both large
and fine particles
OMAX Corporation
21409 72nd Ave South, Kent, WA 98032
253-872-2300
tel 253-872-6190 fax
1-800-838-0343 toll-free
WWW.OMAX.COM website
Printed in the U.S.A © May 6, 2011 All rights reserved. S-0045
About OMAX
OMAX has the industry leading patented
abrasivejet controller with a built-in
expert system. Our exclusive “Compute
First-Move Later” motion control system
automates most programming and tool
setup work, virtually eliminating the need
for extensive operator training. Plus,
with free OMAX Intelli-MAX ® Software
upgrades for the life of the machine and
our ongoing commitment to advance the
efficiency of our technology and soft-
ware, OMAX saves you time and money.
The OMAX Technology
Guarantee entitles you, as
the original owner, to free
OMAX software upgrades
for the life of the machine.
C o r p o r a t i o n
VS-SRS
The Variable Speed Solids Removal System
(VS-SRS) gives the operator the ability to
program flow rate and direction. The controller’s
programmability provides greater garnet removal
than comparable fixed speed units. An optimized
fluid return trough increases settling time and
minimizes abrasive volume returning to the tank.
Garnet
suction line Hopper
SRS controller with VFD Catcher
Tank SRS pump motor
Forward/
reverse water
flow
Return water flow
Tank
release handle
Connect and follow OMAX for the latest news
in waterjet technology.