OMAX 55100 JetMachining Center - Manual (Page 2)

OMAX CORPORATION
21409 72nd Avenue South
Kent, WA 98032
TEL 1-253-872-2300 / 1-800-838-0343
FAX 1-253-872-6190
WWW.OMAX.COM
Made in the USA
MACHINE DIMENSIONS
Footprint (with controller)
12’11” x 7’10”
(3,937 mm x 2,388 mm)
Weight (tank empty) 8,000lb (3,629 kg)
Height (with scissor plumbing) 9’10” (2,998 mm)
Operating Weight (with water in tank) 22,000 lb (10,000 kg)
WORK ENVELOPE
X-Y Cutting Travel*
8’4” x 4’7”
(2,540 mm x 1,397 mm)
Z-Axis Travel* 8” (203mm)
Table Size
10’6” x 5’5”
(3,200 mm x 1,650mm)
DRIVE DESCRIPTION
• Closed loop, digital drives
• Brushless servo motors
• Pre-loaded ball screws, recirculating
ball bearings
• Linear bearings with
hardened,precision ground ways
• Cantilever Y-Axis on bridge
X-Axis
STANDARD MODEL SPECIFICATIONS
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements
3-Phase, 380-480 VAC ±10%,
50-60 Hz
Noise Level
Below 80 dBA at one meter for
submerged cutting
Speed 180 in/min (4,572 mm/min)
Accuracy of Motion at 70˚ F
Ballbar Circularity
(Over 12”)
±0.003”
(±0.076mm)
Repeatability
±0.002”
(±0.051 mm)
OPTIONAL ACCESSORIES
• Tilt-A-Jet ® Cutting Head for taper
compensation
• Variable Speed SRS (VS-SRS)
• Collision Sensing Terrain Follower
(with Tilt-A-Jet only)
• Z-Axis Drill
• Precision Optical Locator (POL)
• Rotary Axis
• Water-only MAXJET ® 5 for cutting
soft materials
• OMAX Mini MAXJET ® 5i Nozzle
Assembly
• Manual Tilt Z
• Stone Cutting Kit
• Laminar Filter
• Waterjet Brick Kit
• Catcher Tank Armor Plating
• Stainless Steel Tank Cover Kit
• Material Holding Kit
• Laser Feature Finder
*Optional accessories may reduce travel. Photos may show optional
accessories. For a complete list of accessories, contact an OMAX sales
representative. Pumps are built to meet UL and CE specifications. Contact
OMAX for detailed utility requirements.
55100
The OMAX Technology Guarantee
entitles you, as the original owner, to
free OMAX software upgrades for the
life of the machine.
Specifications subject to change without notice.
600038B January 2014
ABOUT OMAX
OMAX is the global total solutions provider in advanced abrasive waterjet
systems. Our intuitive Intelli-MAX Software Suite simplifies programming and
reduces setup times, increasing your productivity. OMAX engineers continue
to innovate technology for waterjet machining, from proven 4th generation
pump designs to cutting edge drive systems with micron-level accuracy. With
the largest abrasive waterjet support network in the world, OMAX continues to
shape the future of waterjets.
To see how an OMAX JetMachining Center can save you time and money, call
or visit our website and request a free part analysis today.