RocketFish RF-WHTIB - Quick Setup Guide - Manual

QUICK SETUP GUIDE
Universal Wireless Rear Speaker Kit
RF-WHTIB-A
Wireless receiver Setting up your wireless rear speaker kit Connecting the wireless sender to your home theater
receiver
Caution: Turn off your home theater receiver while connecting the units.
1 Using the included 2-foot speaker cords, connect the right rear speaker
terminals of your home theater receiver to the right speaker terminals of
the wireless sender by connecting the red wire to the red (+) terminals,
and the black wire to the black (-) terminals.
2 Connect the left rear speaker terminals of the home theater receiver the
same way.
Package contents
• Wireless sender • Power adapter (wireless sender)
• Wireless receiver • Power cord (wireless receiver)
• 2-foot speaker wires (2) • User Guide
• Quick Setup Guide
Features
• 2.4 GHz wireless sender and wireless receiver
• Transmits high quality audio over a radio
frequency communication link
• Compact size
• Hidden antennas
• Low power consumption
Wireless sender
Before using your new product, please read these instructions to prevent any damage.
Front view
Power indicator LED
Bottom view
Hanging holes for wall
mounting the wireless sender
CONNECT
button
Back view
Right speaker
input terminals
Power switch
DC IN jack
Left speaker
input terminals
Front view
Power indicator LED
Bottom view
CONNECT
button
Hanging holes for wall
mounting the wireless receiver
Back view
Volume
control knob
Power switch AC IN jack
Right speaker
output terminals Left speaker
output terminals
Home theater receiver back panel
Wireless sender back panel
Press and hold Release
100-240V~ 50/60Hz
Left speaker Right speaker
Center speaker
Home theater receiver
Wireless sender
Wireless receiver
Right rear Left rear