RocketFish RF-MRBTAD - User Manual User Manual
Page 22
Advertising
22
Note:
If you have not plugged the Bluetooth adapter into a USB port on the computer,
the Bluetooth device not Found message opens.
Plug the Bluetooth adapter into a USB port on the computer, then click OK.
7
Click Install. The Found New Hardware Wizard starts installing the
software. When the installation is complete, the Initial Bluetooth
Configuration Wizard screen opens.
8
Click Next, then go to “Setting up the Bluetooth software in
Windows 2000 or Windows XP” on page 23.
RF-MRBTAD_13-0674_MAN_V5_ENG.fm Page 22 Friday, August 16, 2013 2:20 PM
Advertising