You’ll need – RocketFish RF-SBM101 - User Manual User Manual
Page 12
12
STEP 3 - Determine whether your TV has a flat back or an
irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned,
clean surface to protect the screen from damages and
scratches.
2 If your TV has a table-top stand attached, remove the stand.
See the documentation that came with your TV for
instructions.
3 Temporarily lay your existing TV wall mount brackets (not
included) on the back of your TV.
4 Align the screw holes in your existing TV wall mount
brackets with the mounting screw holes on your TV.
5 Identify which type of back your TV may have:
• Flat back: The brackets lay flush against the back of your TV
and do not block any jacks. You do not need spacers when
assembling the wall mount.
You’ll need
TV wallmount bracket
RF-SBM101_13-0263_MAN_V1_ENG.fm Page 12 Monday, May 6, 2013 10:53 AM