TC Electronic UpCon - Manual (Page 38)

Icon Setup
34 UpCon
Joystick page
The MIDI Joystick setup page of the TC Icon
software is not required for operating UpCon
and not described in this manual.
UI page
TC Icon Window parameter
Use the TC Icon Window parameter to specify if
and where faders should be shown. Three op-
tions are available. Changes on this page will
take effect next time you open the TC Icon soft-
ware.
Faders at bottom setting
Faders will be positioned right below the main
interface. This is the default setting.
Fader at right side setting
One fader will be positioned to the right of the
main interface.
No faders setting
No faders will be shown on screen.
Color page
TC Icon software – Color page
Use the parameters on the Color page to define
the TC Icon software’s interface colors.
Color Scheme parameter
Use the Color Scheme parameter to select a
predefined color scheme. You can select a pre-
defined color scheme from the list or define
your own color scheme using one of the “User
scheme” slots.
Color Element parameters
Use the Color Element parameters to customize
the colors of the currently selected User scheme.
You can change the colors used for:
– Background
– Icon Panel Front
– Icon Panel Back
– Device Panel Front
– Device Panel Back
– User Interface Text.
We suggest changing these colors under real-
istic/typical lighting conditions to make sure the
interface is readable during day-to-day use.
Changing User scheme colors
– To change the color, select a user interface
component in the Color Element list (e.g.
Background) and set the three R(ed) G(reen)
B(lue) faders to the desired values.
– To apply the new color scheme, click the “Ap-
ply User Scheme” button.