Changing the battery, Technical specifications, Getting support – TC Electronic Trinity Reverb User Manual
Page 19
Getting support
Trinity Reverb English Manual Version 1.0 17
Changing the battery
If you need to change the battery of your pedal,
proceed as follows:
– Unscrew the thumb-screw on the back of the
pedal and detach the back-plate.
– Unmount the old battery and attach the new
battery to the battery clip making sure the po-
larity is correct.
– Remount the back-plate.
Notes regarding batteries
– Batteries must never be heated, taken apart or
thrown into fire or water.
– Only rechargeable batteries can be recharged.
– Remove the battery when the pedal is not
being used for a longer period of time to save
battery life.
– Dispose batteries according to local laws and
regulations.
Technical Specifications
– Reverb Types:
8 TC settings
+ 2 settings tweaked by ProGuitarShop
+ TonePrint
– Mono/Stereo: Auto-sensing – automatic
Mono or True Stereo mode depending on the
connections used
– Bypass mode:
True Bypass (Buffered Bypass optional)
– Signal Circuitry: Analog Dry-Through
– Dimensions (W x D x H):
72 x 122 x 50 mm / 2.8 x 4.8 x 2.0”
– Input Connector Types:
2 Standard ¼” jack – mono/TS
– Output Connector Types:
2 Standard ¼” jack – mono/TS
– Power Input: Standard 9V DC, centre nega-
tive >100 mA (not supplied)
– Battery option: Standard 9V (not supplied)
– Input Impedance: 1 MΩ
– Output Impedance: 100 Ω
Getting support
If you still have questions about the product af-
ter reading this manual, please get in touch with
TC Support: