TC Electronic BG250 - Manual (Page 19)

Operation – Rear Panel
15
or any other consumer playback device as a source for
rehearsing.
14. PHONES (Speaker Mute)
The PHONES jack is a 1/8” connector for headphones.
With a mild speaker filter applied to the bass sound, our
studio quality headphone amp caters for a great head-
phone sound. The headphone output also plays back
any signal connected to the AUX IN input jack. This
feature allows you to play along with an audio player, a
signal from a computer or any other audio source play-
ing background tracks. This feature is excellent for re-
hearsing or checking out new tracks without disturbing
the neighbors.
15. BALANCED OUTPUT
Use the BALANCED OUT XLR jack to connect the
BH250 / BG250-208 to the PA when you play on stage,
or to connect your amp to a recording device when you
are in the studio.
16. PRE/POST EQ button
Use the PRE/POST button located to the left side of
the BALANCED OUT jack to determine where in the
signal chain the signal for the balanced output should
be tapped.
■ PRE setting: The signal is tapped before the EQ and
TONEPRINT effect.
■ POST setting: The signal is tapped after EQ and
TONEPRINT effect.