Rainbow Electronics MAX66040 User Manual

Abridged data sheet, General description, Applications

Advertising
background image

MAX66040

ISO/IEC 14443 Type B-Compliant

Secure Memory

________________________________________________________________

Maxim Integrated Products

1

219-0012; Rev 0; 1/11

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

ABRIDGED DATA SHEET

General Description

The MAX66040 combines 1024 bits of user EEPROM
with secure hash algorithm (SHA-1) challenge-and-
response authentication (ISO/IEC 10118-3 SHA-1), a
64-bit unique identifier (UID), one 64-bit secret, and a
13.56MHz RF interface (ISO/IEC 14443 Type B, Parts 2-
4) in a single chip. The memory is organized as 16
blocks of 8 bytes plus three more blocks, one for the
secret and two for data and control registers. Except for
the secret, each block has a user-readable write-cycle
counter. Four adjacent user EEPROM blocks form a
memory page (pages 0 to 3). The integrated SHA-1
engine provides a message authentication code (MAC)
using data from the EEPROM of the device and the 64-
bit secret to guarantee secure, symmetric authentica-
tion for both reading and writing to the device. Memory
protection features are write protection and EPROM
emulation, which the user can set for each individual
memory page. Page 3 can also be read-protected for
enhanced authentication strength. Memory access is
accomplished through the block transmission protocol
(ISO/IEC 14443-4), where requests and responses are
exchanged through I-blocks once a device is in the
ACTIVE state. The data rate can be as high as
847.5kbps. The reader must support a frame size of 26
bytes. The device supports an application family identi-
fier (AFI) and a card identifier (CID). ISO/IEC 14443
functions not supported are chaining, frame-waiting
time extension, and power indication.

Applications

Driver Identification (Fleet Application)

Access Control

e-Cash

Asset Tracking

Features

Fully Compliant ISO/IEC 14443 (Parts 2-4) Type B

Interface

13.56MHz ±7kHz Carrier Frequency
1024-Bit Secure User EEPROM with Block Lock

Feature, Write-Cycle Counter, and Optional
EPROM-Emulation Mode

64-Bit UID
512-Bit SHA-1 Engine to Compute 160-Bit MAC

and to Generate Secrets

Mutual Authentication: Data Read from Device is

Verified and Authenticated by the Host with
Knowledge of the 64-Bit Secret

Read and Write (64-Bit Block)
Supports AFI and CID Function
10ms Maximum Programming Time
Write: 10% ASK Modulation at 105.9kbps,

211.9kbps, 423.75kbps, or 847.5kbps

Read: Load Modulation Using BPSK Modulated

Subcarrier at 105.9kbps, 211.9kbps, 423.75kbps,
or 847.5kbps

200,000 Write/Erase Cycles (Minimum)
40-Year Data Retention (Minimum)

IC LOAD

SWITCHED

LOAD

MAGNETIC
COUPLING

ANTENNA

RX_IN

TX_OUT

TRANSMITTER

13.56MHz READER

MAX66040

Typical Operating Circuit

EVALUATION KIT

AVAILABLE

Ordering Information

+

Denotes a lead(Pb)-free/RoHS-compliant package.

PART TEMP

RANGE

PIN-PACKAGE

MAX66040E-000AA+

-25°C to +50°C

ISO Card

MAX66040K-000AA+

-25°C to +50°C

Key Fob

Mechanical Drawings appear at end of data sheet.

Advertising