Rainbow Electronics MAX6651 User Manual

C-compatible interface, General description, Applications

Advertising
background image

General Description

The MAX6650/MAX6651 fan controllers use an
SMBus™/I

2

C™-compatible interface to regulate and mon-

itor the speed of 5VDC/12VDC brushless fans with built-in
tachometers. They automatically force the fan’s tachome-
ter frequency (fan speed) to match a preprogrammed
value in the Fan-Speed Register by using an external
MOSFET or bipolar transistor to linearly regulate the volt-
age across the fan. The MAX6650 regulates the speed of
a single fan by monitoring its tachometer output. The
MAX6651 also regulates the speed of a single fan, but it
contains additional tachometer inputs to monitor up to four
fans and control them as a single unit when they are used
in parallel.

The MAX6650/MAX6651 provide general-purpose
input/output (GPIO) pins that serve as digital inputs,
digital outputs, or various hardware interfaces. Capable
of sinking 10mA, these open-drain inputs/outputs can
drive an LED. To add additional hardware control, con-
figure GPIO1 to fully turn on the fan in case of software
failure. To generate an interrupt when a fault condition
is detected, configure GPIO0 to behave as an active-
low alert output. Synchronize multiple devices by set-
ting GPIO2 (MAX6651 only) as an internal clock output
or an external clock input.

The MAX6650 is available in a space-saving 10-pin
µMAX package, and the MAX6651 is available in a
small 16-pin QSOP package.

________________________Applications

RAID

Desktop Computers

Servers

Networking

Workstations

Telecommunications

____________________________Features

Closed/Open-Loop Fan-Speed Control for

5V/12V Fans

2-Wire SMBus/I

2

C-Compatible Interface

Monitors Tachometer Output

Single Tachometer (MAX6650)
Up to Four Tachometers (MAX6651)

Programmable Alert Output
GPIOs
Hardware Full-On Override
Synchronize Multiple Fans
Four Selectable Slave Addresses
+3V to +5.5V Supply Voltage
Small Packages

10-Pin µMAX (MAX6650)
16-Pin QSOP (MAX6651)

MAX6650/MAX6651

Fan-Speed Regulators and Monitors

with SMBus/I

2

C-Compatible Interface

________________________________________________________________ Maxim Integrated Products

1

19-1784; Rev 1; 9/01

Ordering Information

10 µMAX

PIN-PACKAGE

TEMP. RANGE

-40°C to +85°C

MAX6650EUB

PART

16 QSOP

-40°C to +85°C

MAX6651EEE

I

2

C is a trademark of Philips Corp.

SMBus is a trademark of Intel Corp.

MAX6650

V

CC

SCL

10k

SDA

GPIO0

OUT

ADD

GND

FB

TACH0

V

CC

3V TO 5.5V

V

FAN

5V OR 12V

C

COMP

10

µF

I

2

C/SMBus

INTERFACE

GPIO1

LED

FAN

FULL ON

ALERT

Typical Operating Circuit

Pin Configurations appear at end of data sheet.

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

Advertising