Rainbow Electronics MAX5128 - Manual (Page 3)

MAX5128
128-Tap, Nonvolatile, Linear-Taper Digital
Potentiometer in 2mm x 2mm µDFN Package
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(V CC = +2.7V to +5.25V, H = V CC , L = GND, T A = -40°C to +85°C. Typical values are at V CC = +5.0V, T A = +25°C, unless otherwise noted.)
(Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
NONVOLATILE MEMORY RELIABILITY
Data Retention T A = +85°C 50 Years
T A = +25°C 80,000
Endurance
T
A
= +85°C 50,000
Stores
POWER SUPPLY
Supply Voltage V CC 2.70 5.25 V
Average Programming Current I PG
During nonvolatile write only;
digital inputs = V
CC or GND
220 400 µA
Peak Programming Current I PK
During nonvolatile write only;
digital inputs = V
CC
or GND
4 mA
Standby Current I CC Digital inputs = V CC or GND, T A = +25°C 0.5 1.5 µA
TIMING CHARACTERISTICS
(V CC = +2.7V to +5.25V, H = V CC , L = GND, T A = -40°C to +85°C. Typical values are at V CC = +5.0V, T A = +25°C, unless otherwise noted.)
(See Figures 1, 2, 3, and 4).
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
ANALOG SECTION
Wiper Settling Time t S (Note 7) 500 ns
DIGITAL SECTION
UP or DN Pulse-Width High t PWH 80 ns
UP or DN Pulse-Width Low t PWL 80 ns
UP or DN Glitch Immunity t IMMU 20 ns
UP Fall to DN Rise Setup or DN
Fall to UP Rise Setup
t MS1 80 ns
Before Entering NVM-Write
Mode, UP Fall to UP Rise
t MS2 80 ns
UP Rise to DN Rise Setup when
Entering NVM-Write
t WS 80 ns
UP Fall to DN Fall Hold or DN Fall
to UP Fall Hold during NVM-
Write
t WH 0 ns