Rainbow Electronics MAX9034 - Manual

General Description
The MAX9030/MAX9031/MAX9032/MAX9034 single/
dual/quad comparators are optimized for single-supply
applications from +2.5V to +5.5V but can also be oper-
ated from dual supplies. These comparators have a
188ns propagation delay and consume 35µA of supply
current per comparator over the -40°C to +125°C oper-
ating temperature range. The combination of low-
power, single-supply operation down to +2.5V, and
ultra-small footprint makes these devices ideal for
portable applications.
The MAX9030 is a low-cost single comparator with
shutdown. The MAX9031, MAX9032, and MAX9034 are
low-cost single, dual, and quad comparators without
shutdown, respectively. The comparators’ 4mV of built-
in hysteresis provides noise immunity and prevents
oscillations even with a slow-moving input signal. The
input common-mode range extends from the negative
supply to within 1.1V of the positive supply. The design
of the comparator output stage substantially reduces
switching current during output transitions, virtually
eliminating power-supply glitches.
The MAX9030 single comparator with shutdown is avail-
able in the space-saving 6-pin SC70 and SOT23 pack-
ages. The MAX9031 single comparator is available in tiny
5-pin SC70 and SOT23 packages. The MAX9032 dual
comparator is available in 8-pin SOT23 and µMAX pack-
ages, and the MAX9034 quad comparator is available in
a 14-pin TSSOP package.
________________________Applications
Features
♦ Low-Cost Solution Available in Space-Saving
SC70 Packages (MAX9030/MAX9031)
♦ +2.5 to +5.5V Single-Supply Voltage Range
♦ Comparator Output Swings Rail-to-Rail
®
♦ Internal 4mV Comparator Hysteresis
♦ 188ns Propagation Delay
♦ Low 35µA Supply Current
♦ No Phase Reversal for Overdriven Inputs
♦ Space-Saving Packages
5-Pin SC70 (MAX9031)
6-Pin SC70 (MAX9030)
8-Pin SOT23 (MAX9032)
14-Pin TSSOP (MAX9034)
MAX9030/MAX9031/MAX9032/MAX9034
Low-Cost, Ultra-Small, Single/Dual/Quad
Single-Supply Comparators
________________________________________________________________ Maxim Integrated Products 1
TOP VIEW
V SS
OUT IN-
1 5 V DD IN+
MAX9031
SC70-5/SOT23-5
2
3 4
INB-
INB+ V SS
1
2
8
7
V DD
OUTB INA-
INA+
OUTA
SOT23-8/ µMAX-8/
SO-8
3
4
6
5
MAX9032
14
13
12
11
10
9
8
1
2
3
4
5
6
7
OUTD
IND-
IND+
V SS V DD
INA+
INA-
OUTA
MAX9034
INC+
INC-
OUTC OUTB
INB-
INB+
TSSOP-14/SO-14
V SS
OUT IN-
1 6 V DD
5
IN+
MAX9030
SC70-6/SOT23-6
2
3 4
SHDN
Pin Configurations
19-1767; Rev 0; 10/00
Ordering Information
*Future product–contact factory for availability.
Battery-Powered
Portable Systems
Mobile Communications
Sensor Signal Detection
Photodiode Preamps
Digital Line Receivers
Keyless Entry Systems
Threshold Detectors/
Discriminators
Typical Application Circuit appears at end of data sheet.
PART TEMP. RANGE PIN-PACKAGE
M A X9 0 3 0 AX T- T -40 °C to +125°C 6 SC70
MAX9030AUT- T -40 °C to +125°C 6 SOT23
MAX9031AXK- T -40 °C to +125°C 5 SC70
MAX9031AUK- T -40 °C to +125°C 5 SOT23
M A X 9 0 3 2 A KA - T -40 °C to +125°C 8 SOT23
MAX9032AUA* -40 °C to +125°C 8 µMAX
MAX9032ASA -40 °C to +125°C 8 SO
M A X9 0 3 4 AUD -40 °C to +125°C 14 TSSOP
MAX9034AS D -40 °C to +125°C 14 SO
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.