Rainbow Electronics W29EE011 - Manual (Page 9)

W29EE011
Publication Release Date: July 1999
- 9 - Revision A12
DC CHARACTERISTICS
Absolute Maximum Ratings
PARAMETER RATING UNIT
Power Supply Voltage to V ss Potential -0.5 to +7.0 V
Operating Temperature 0 to +70
°
C
Storage Temperature -65 to +150
°
C
D.C. Voltage on Any Pin to Ground Potential except OE
-0.5 to V DD +1.0 V
Transient Voltage (< 20 nS ) on Any Pin to Ground Potential -1.0 to V DD +1.0 V
Voltage on OE Pin to Ground Potential
-0.5 to 12.5 V
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability
of the device.
Operating Characteristics
(V DD = 5.0V ± 10 % , V SS = 0V, T A = 0 to 70 ° C)
PARAMETER SYM. TEST CONDITIONS LIMITS UNIT
MIN. TYP. MAX.
Power Supply Current I CC CE = OE = V
IL , WE = V IH ,
all I/Os open
Address inputs = V IL /V IH ,
at f = 5 MHz
- - 50 mA
Standby V DD
Current (TTL input)
I SB 1 CE = V
IH , all I/Os open
Other inputs = V IL /V IH
- 2 3 mA
Standby V DD Current
(CMOS input)
I SB 2 CE = V
DD -0.3V, all I/Os open
Other inputs = V DD -0.3V/GND
- 20 100
µ
A
Input Leakage Current I LI V IN = GND to V DD - - 1
µ
A
Output Leakage
Current I LO V IN = GND to V DD - - 10
µ
A
Input Low Voltage V IL - -0.3 - 0.8 V
Input High Voltage V IH - 2.0 - V DD
+0.5
V
Output Low Voltage V OL I OL = 2.1 mA - - 0.45 V
Output High Voltage V OH I OH = -0.4 mA 2.4 - - V
Power-up Timing
PARAMETER SYMBOL TYPICAL UNIT
Power-up to Read Operation T PU .READ 100
µ
S
Power-up to Write Operation T PU .WRITE 5 mS