Rainbow Electronics MAX6764 - Manual

General Description
The MAX6754–MAX6764 low-power window detectors
monitor undervoltage/overvoltage conditions on system
power supplies. These devices assert when the moni-
tored voltage is under the undervoltage and/or over the
overvoltage thresholds.
The MAX6754–MAX6759/MAX6763/MAX6764 monitor a
single voltage. The MAX6760/MAX6761/MAX6762
monitor dual-voltage systems. The MAX6754/MAX6755/
MAX6756 provide a single undervoltage/overvoltage
output and the MAX6757–MAX6764 provide indepen-
dent undervoltage and overvoltage outputs. The out-
puts are available in push-pull or open-drain
configurations.
The MAX6754–MAX6762 offer factory-fixed voltage
thresholds for monitoring system voltages from 0.9V to
5V with a selectable ±5%, ±10%, or ±15% window volt-
age. The MAX6763/MAX6764 allow for externally
adjustable thresholds. The MAX6754–MAX6762 are
available in two delay timing options (20µs, typ or
100ms, min). The MAX6760/MAX6761/MAX6762 also
include a latched overvoltage output function and the
MAX6754–MAX6762 include a manual reset input.
The family of products is available in small SOT23 and
TDFN packages and is specified over the extended
temperature range of -40°C to +125°C.
Applications
Features
♦ Single- or Dual-Supply Voltage Monitors
♦ Factory-Trimmed Window Threshold Options for
5V, 3.3V, 3V, 2.5V, 1.8V, 1.5V, 1.2V, and 0.9V
Supplies
♦ Externally Adjustable Window Monitoring Options
for Supplies Down to 0.5V
♦ Selectable Window Threshold Options (±5%,
±10%, ±15%)
♦ Single (Combined UV/OV) or Dual (Separate UV
and OV) Outputs
♦ 20µs (typ) or 100ms (min) Timeout Period Options
(MAX6754–MAX6762)
♦ Manual Reset Input (MAX6754–MAX6762)
♦ Latched Overvoltage Output Function
(MAX6760/MAX6761/MAX6762)
♦ Immune to Short Voltage Transients
♦ Low 10µA Supply Current
♦ Low-Voltage Operation (Outputs Valid for V
CC
Down to 1V)
♦ -40°C to +125°C Operating Temperature Range
♦ Small SOT23 and TDFN Packages
MAX6754–MAX6764
Low-Power, Single/Dual-Voltage Window
Detectors
________________________________________________________________ Maxim Integrated Products 1
Ordering Information
MAX6757
NMI
RESET MR
GND
V CC
UV
OV
SET
V CC
µP
Typical Application Circuit
19-3031; Rev 0; 10/03
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART* TEMP RANGE PIN-PACKAGE
MAX6754UK_D_-T -40°C to +125°C 5 SOT23-5
MAX6755UK_D_-T -40°C to +125°C 5 SOT23-5
MAX6756UK_D_-T -40°C to +125°C 5 SOT23-5
MAX6757UT_D_-T -40°C to +125°C 6 SOT23-6
MAX6758UT_D_-T -40°C to +125°C 6 SOT23-6
*Note: Insert the threshold level suffixes for V
CC
and V
CC2
(Tables 1 and 2) after UK, UT, or TA. For the
MAX6754–MAX6759, insert only the V
CC threshold suffix after
the UK or UT. Insert the reset timeout delay ( Table 3) after D to
complete the part number. For example, the MAX6760TALTD3-T
provides a V
CC threshold of 5V, a V CC2 threshold of 3.3V, and a
100ms minimum reset timeout period. Sample stock is generally
held on standard versions only (see the Standard Versions
table ). Standard versions have an order increment requirement
of 2500 pieces. Nonstandard versions have an order increment
requirement of 10,000 pieces. Contact factory for availability.
Ordering Information continued at end of data sheet.
Pin Configurations appear at end of data sheet.
Telecommunications
Networking
Computers/Servers
Data Storage
Power Metering
DC-DC Converter
Modules
Automotive