Rainbow Electronics MAX4244 - Manual

For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 408-737-7600 ext. 3468.
________________General Description
The MAX4240–MAX4244 family of micropower op amps
operate from a single +1.8V to +5.5V supply or dual
±0.9V to ±2.75V supplies and have Beyond-the-Rails™
inputs and Rail-to-Rail
® output capabilities. These
amplifiers provide a 90kHz gain-bandwidth product
while using only 10µA of supply current per amplifier.
The MAX4241/MAX4243 have a low-power shutdown
mode that reduces supply current to less than 1µA and
forces the output into a high-impedance state. Although
the minimum operating voltage is specified at +1.8V,
these devices typically operate down to +1.5V. The
combination of ultra-low-voltage operation, beyond-the-
rails inputs, rail-to-rail outputs, and ultra-low power con-
sumption makes these devices ideal for any portable/
two-cell battery-powered system.
These amplifiers have an input common-mode range
that extends 200mV beyond each rail, and their outputs
typically swing to within 9mV of the rails with a 100k
Ω
load. Beyond-the-rails input and rail-to-rail output char-
acteristics allow the full power-supply voltage to be
used for signal range. The combination of low input off-
set voltage, low input bias current, and high open-loop
gain makes them suitable for low-power/low-voltage
precision applications.
The MAX4240 is offered in a space-saving 5-pin SOT23
package. All specifications are guaranteed over the
-40°C to +85°C extended temperature range.
________________________Applications
Two-Cell Battery- Strain Gauges
Powered Systems Sensor Amplifiers
Portable/Battery-Powered Cellular Phones
Electronic Equipment Notebook Computers
Digital Scales PDAs
____________________________Features
♦ Ultra-Low-Voltage Operation:
Guaranteed Down to +1.8V
Typical Operation to +1.5V
♦ Ultra-Low Power Consumption:
10µA Supply Current per Amplifier
1µA Shutdown Mode (MAX4241/MAX4243)
Up to 200,000 Hours Operation from Two AA
Alkaline Cells
♦ Beyond-the-Rails Input Common-Mode Range
♦ Outputs Swing Rail-to-Rail
♦ No Phase Reversal for Overdriven Inputs
♦ 200µV Input Offset Voltage
♦ Unity-Gain Stable for Capacitive Loads up to 200pF
♦ 90kHz Gain-Bandwidth Product
♦ Available in Space-Saving 5-Pin SOT23 and
8-Pin µMAX Packages
MAX4240–MAX4244
Single/Dual/Quad, +1.8V/10µA, SOT23,
Beyond-the-Rails Op Amps
________________________________________________________________ Maxim Integrated Products 1
V EE
IN- IN+
1 5 V
CC
OUT
MAX4240
SOT23-5
TOP VIEW
2
3 4
_________________Pin Configurations
19-1343; Rev 0; 3/98
PART
MAX4240 EUK-T
MAX4241 EUA
MAX4241ESA -40°C to +85°C
-40°C to +85°C
-40°C to +85°C
TEMP. RANGE
PIN-
PACKAGE
5 SOT23-5
8 µMAX
8 SO
_______________Ordering Information
Pin Configurations continued at end of data sheet.
_____________________Selector Guide
NO. OF
AMPS
PIN-PACKAGE
MAX4240 1 5-pin SOT23
MAX4241 1 8-pin µMAX/SO
PART
MAX4242 2 8-pin µMAX/SO
SHUTDOWN
—
Yes
—
MAX4243 2
10-pin µMAX,
14-pin SO
MAX4244 4 14-pin SO
Yes
—
Beyond-the-Rails is a trademark of Maxim Integrated Products.
Rail-to-Rail is a registered trademark of Nippon Motorola Ltd.
MAX4242 EUA
MAX4242ESA
MAX4243 EUB -40°C to +85°C
-40°C to +85°C
-40°C to +85°C 8 µMAX
8 SO
10 µMAX
MAX4243ESD
MAX4244 ESD -40°C to +85°C
-40°C to +85°C 14 SO
14 SO
SOT
TOP MARK
ACCS
—
—
—
—
—
—
—