Rainbow Electronics MAX9217 - Manual (Page 16)

MAX9217
27-Bit, 3MHz-to-35MHz
DC-Balanced LVDS Serializer
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products, Inc.
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
48L THIN QFN.EPS
A
1
2 21-0160
PACKAGE OUTLINE, 48L THIN QFN
6x6x0.8mm BODY / 0.4mm LEAD PITCH
4. PACKAGE LENGTH / PACKAGE WIDTH ARE CONSIDERED AS SPECIAL CHARACTERISTIC. (S)
1. ALL DIMENSIONS ARE IN mm. ANGLES IN DEGREES.
3. WARPAGE SHALL NOT EXCEED 0.10 mm.
2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. COPLANARITY SHALL NOT EXCEED 0.08mm.
NOTE :
A
2
2 21-0160
PACKAGE OUTLINE, 48L THIN QFN
6x6x0.8mm BODY / 0.4mm LEAD PITCH
COMMON DIMENSIONS
L
L1
k
k1
S
A
b
E
D
A2
A1
S B M Y L O MIN. NOM. MAX.
N
ND
NE
e
T4866-1
PKG. E2
EXPOSED PAD VARIATONS
D2
CODE MIN. NOM. MAX. MIN. NOM. MAX.
12
12
48
0.300 0.400 0.500
0.400 0.500 0.600
0.350 0.450 0.550
0.250 0.350 0.450
5.900 6.000 6.050
0.400 TYP.
5.900 6.000 6.100
0.150 0.200 0.250
0.200 REF.
0.000 -- -- 0.050
0.700 0.750 0.800
4.40 4.30 4.20 4.40 4.30 4.20
7. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY.
DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED.
THE TERMINAL #1 IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE.
6. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012.
5. REFER TO JEDEC MO-220.