Rainbow Electronics MAX11645 User Manual

General description, Applications features, Ordering information

Advertising
background image

General Description

The MAX11644/MAX11645 low-power, 12-bit, 1-/2-
channel analog-to-digital converters (ADCs) feature
internal track/hold (T/H), voltage reference, clock, and
an I

2

C-compatible 2-wire serial interface. These

devices operate from a single supply of 2.7V to 3.6V
(MAX11645) or 4.5V to 5.5V (MAX11644) and require
only 6μA at a 1ksps sample rate. AutoShutdown™ pow-
ers down the devices between conversions, reducing
supply current to less than 1μA at low throughput rates.
The MAX11644/MAX11645 each measure two single-
ended or one differential input. The fully differential ana-
log inputs are software configurable for unipolar or
bipolar, and single-ended or differential operation.

The full-scale analog input range is determined by the
internal reference or by an externally applied reference
voltage ranging from 1V to V

DD

. The MAX11645 fea-

tures a 2.048V internal reference and the MAX11644
features a 4.096V internal reference.

The MAX11644/MAX11645 are available in an ultra-tiny
1.9mm x 2.2mm WLP package and an 8-pin μMAX

®

package. The MAX11644/MAX11645 are guaranteed
over the extended temperature range (-40°C to +85°C).
For pin-compatible 10-bit parts, refer to the MAX11646/
MAX11647 data sheet.

Applications

Features

Ultra-Tiny 1.9mm x 2.2mm Wafer Level Package
High-Speed I

2

C-Compatible Serial Interface

400kHz Fast Mode
1.7MHz High-Speed Mode

Single-Supply

2.7V to 3.6V (MAX11645)
4.5V to 5.5V (MAX11644)

Internal Reference

2.048V (MAX11645)
4.096V (MAX11644)

External Reference: 1V to V

DD

Internal Clock

2-Channel Single-Ended or 1-Channel Fully
Differential

Internal FIFO with Channel-Scan Mode
Low Power

670µA at 94.4ksps
230µA at 40ksps
60µA at 10ksps
6µA at 1ksps
0.5µA in Power-Down Mode

Software-Configurable Unipolar/Bipolar

MAX11644/MAX11645

Low-Power, 1-/2-Channel, I

2

C, 12-Bit ADCs

in Ultra-Tiny 1.9mm x 2.2mm Package

________________________________________________________________

Maxim Integrated Products

1

Ordering Information

19-5225; Rev 1; 9/10

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

EVALUATION KIT

AVAILABLE

PART

TEMP RANGE

PIN-
PACKAGE

I

2

C SLAVE

ADDRESS

MAX11644EUA+ -40°C to +85°C 8 μMAX

0110110

MAX11645EUA+ -40°C to +85°C 8 μMAX

0110110

MAX11645EWC+ -40°C to +85°C 12 WLP

0110110

Typical Operating Circuit and Selector Guide appear at end
of data sheet.

AutoShutdown is a trademark and μMAX is a registered trademark
of Maxim Integrated Products, Inc.

+

Denotes a lead(Pb)-free/RoHs-compliant package.

Handheld Portable
Applications

Medical Instruments

Battery-Powered Test
Equipment

Solar-Powered Remote
Systems

Received-Signal-Strength
Indicators

System Supervision

Power-Supply Monitoring

Advertising