Rainbow Electronics MAX14523C - Manual

General Description
The MAX14523A/MAX14523AL/MAX14523B/MAX14523C
programmable current-limit switches feature internal
current limiting to prevent damage to host devices due
to faulty load conditions. These current-limit switches
feature a low 70m
Ω on-resistance and operate from a
+1.7V to +5.5V input voltage range. The current limit is
adjustable from 250mA to 1.5A, making these devices
ideal for SDIO (secure digital input/output) and other
load-switching applications.
Each device in the family handles an overcurrent event
differently depending on the option selected. The
MAX14523A/MAX14523AL go into an autoretry mode,
the MAX14523B latches off the switch, and the
MAX14523C features a continuous current-limit mode.
Additional safety features include thermal shutdown to
prevent overheating and reverse-current blocking to
prevent current from being driven back into the source.
The MAX14523A/MAX14523AL/MAX14523B/MAX14523C
are available in a tiny 8-pin, 3mm x 3mm, TDFN pack-
age and operate over the -40°C to +125°C automotive
temperature range.
Applications
SDIO Ports
USB Ports
Notebook VGA Ports
GPS
Cell Phones
MP3 Players
UTCA/ATCA Platforms
Features
♦ Accurate (±10%) Overload Current Limit
♦ Adjustable Current-Limit Threshold
♦ Low-Dropout Voltage (70mV at 1A Load Current)
♦ Short-Circuit Protection
♦ Thermal-Shutdown Protection
♦ Reverse-Current Protection
♦ 170µA (typ) Supply Current
♦ Shutdown Reverse Current, 0.6µA (max)
♦ +1.7V to +5.5V Supply Voltage Range
♦ Tiny 8-Pin, 3mm x 3mm, TDFN Package
MAX14523A/MAX14523AL/MAX14523B/MAX14523C
250mA to 1.5A, Adjustable
Current-Limit Switches
________________________________________________________________ Maxim Integrated Products 1
Ordering Information/Selector Guide
MAX14523A
MAX14523AL
MAX14523B
MAX14523C
1 μF
R SETI
10k Ω
BIAS
VOLTAGE
LOAD
CHARGE
PUMP
CONTROL
LOGIC
POWER
SUPPLY
μP CURRENT
REFERENCE
*ON FOR THE MAX14523AL ONLY.
GND
N.C.
1 μF
OUT IN
FLAG
ON(ON)*
V PULLUP
Typical Operating Circuit
19-4814; Rev 0; 7/09
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
PART PIN-PACKAGE TOP MARK ON POLARTIY OVERCURRENT RESPONSE
MAX14523AATA+ 8 TDFN-EP* BLO Active-High Autoretry
MAX14523ALATA+** 8 TDFN-EP* BLP Active-Low Autoretry
MAX14523BATA+ 8 TDFN-EP* BLQ Active-High Latch-Off
MAX14523CATA+ 8 TDFN-EP* BLS Active-High Continuous
Pin Configuration appears at end of data sheet.
Note: All devices are specified over the -40°C to +125°C operating temperature range.
+
Denotes a lead(Pb)-free package/RoHs-compliant package.
* EP = Exposed pad.
** Future product—contact factory for availability.