Rainbow Electronics MAX6380 - Manual

General Description
The MAX6375–MAX6380 are ultra-low-power circuits
used for monitoring battery, power-supply, and regulat-
ed system voltages. Each detector contains a precision
bandgap reference, comparator, and internally trimmed
resistors that set specified trip threshold voltages.
These devices provide excellent circuit reliability and
low cost by eliminating external components and
adjustments when monitoring nominal system voltages
from 2.5V to 5V.
These circuits perform a single function: they assert an
output signal whenever the V
CC supply voltage falls
below a preset threshold. The devices are differentiated
by their output logic configurations and preset thresh-
old voltages. The MAX6375/MAX6378 (push-pull) and
MAX6377/MAX6380 (open-drain) have an active-low
output (OUT is logic low when V
CC
is below V
TH
). The
MAX6376/MAX6379 have an active-high push-pull out-
put (OUT is logic high when V
CC is below V TH ). All
parts are guaranteed to be in the correct output logic
state for V
CC down to 1V. The detector is designed to
ignore fast transients on V CC . The MAX6375/MAX6376/
MAX6377 have voltage thresholds between 2.20V and
3.08V in approximately 100mV increments. The
MAX6378/MAX6379/MAX6380 have voltage thresholds
between 3.30V and 4.63V in approximately 100mV
increments.
Ultra-low supply current of 500nA (MAX6375/MAX6376/
MAX6377) makes these parts ideal for use in portable
equipment. All six devices are available in a space-sav-
ing SC70 package or in a tiny SOT23 package.
Applications
Precision Battery Monitoring
Load Switching/Power Sequencing
Power-Supply Monitoring in Digital/Analog Systems
Portable/Battery-Powered Equipment
Features
♦ Ultra-Low 500nA Supply Current
(MAX6375/MAX6376/MAX6377)
♦ Thresholds Available from 2.20V to 4.63V in
Approximately 100mV Increments
♦ ±2.5% Threshold Accuracy Over Temperature
♦ Low Cost
♦ Available in Three Versions: Push-Pull OUT,
Push-Pull OUT, and Open-Drain OUT
♦ Power-Supply Transient Immunity
♦ No External Components
♦ Available in Either a 3-Pin SC70
or 3-Pin SOT23 Package
MAX6375–MAX6380
3-Pin, Ultra-Low-Power SC70/SOT23
Voltage Detectors
________________________________________________________________ Maxim Integrated Products 1
( ) ARE FOR MAX6376/MAX6379 ONLY.
TOP VIEW
OUT(OUT)
1
3
GND
SC70-3
2 GND
1
3
SOT23-3
2
V
CC
MAX6375XR–
MAX6380XR
MAX6375UR–
MAX6380UR
V CC
OUT(OUT)
Pin Configuration
19-1721; Rev 1; 12/01
* The MAX6375/MAX6376/MAX6377 are available in factory-pre-
set thresholds from 2.20V to 3.08V, in approximately 0.1V incre-
ments. The MAX6378/MAX6379/MAX6380 are available in
factory-preset thresholds from 3.30V to 4.63V, in approximately
0.1V increments. Choose the desired threshold suffix from
Table 1 and insert it in the blank spaces following R. There are
21 standard versions, with a required order increment of 2500
pieces. Sample stock is generally held on the standard versions
only (see the Selector Guide). The required order increment is
10,000 pieces for nonstandard versions (Table 2). Contact facto-
ry for availability. All devices available in tape-and-reel only.
Ordering Information
Selector Guide appears at end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
PART* TEMP RANGE PIN-PACKAGE
MAX6375UR _ _ -T -40°C to +85°C 3 SOT23-3
MAX6375XR _ _ -T -40°C to +85°C 3 SC70-3
MAX6376UR _ _ -T -40°C to +85°C 3 SOT23-3
MAX6376XR _ _ -T -40°C to +85°C 3 SC70-3
Ordering information continued at end of data sheet