Rainbow Electronics MAXQ613 - Manual

_______________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
16-Bit Microcontroller with Infrared Module
MAXQ613
19-5320; Rev 2; 8/10
Ordering Information/Selector Guide
General Description
The MAXQ613 is a low-power, 16-bit MAXQ ® microcon-
troller designed for low-power applications including uni-
versal remote controls, consumer electronics, and white
goods. The device combines a powerful 16-bit RISC
microcontroller and integrated peripherals including a
universal synchronous/asynchronous receiver-transmit-
ter (USART) and an SPI™ master/slave communications
port, along with an IR module with carrier frequency
generation and flexible port I/O capable of multiplexed
keypad control.
The device includes 48KB of flash program memory and
1.5KB of data SRAM. Intellectual property (IP) protec-
tion is provided by a secure MMU that supports multiple
application privilege levels and protects code against
copying and reverse engineering. Privilege levels enable
vendors to provide libraries and applications to execute
on the device, while limiting access to only data and
code allowed by their privilege level.
For the ultimate in low-power battery-operated perfor-
mance, the device includes an ultra-low-power stop
mode (0.2µA typ). In this mode, the minimum amount of
circuitry is powered. Wake-up sources include external
interrupts, the power-fail interrupt, and a timer interrupt.
The microcontroller runs from a wide 1.70V to 3.6V oper-
ating voltage.
Applications
Features
S
High-Performance, Low-Power, 16-Bit RISC Core
S
DC to 12MHz Operation Across Entire Operating Range
S
1.70V to 3.6V Operating Voltage
S
33 Total Instructions for Simplified Programming
S
Three Independent Data Pointers Accelerate Data
Movement with Automatic Increment/Decrement
S
Dedicated Pointer for Direct Read from Code Space
S
16-Bit Instruction Word, 16-Bit Data Bus
S
16 x 16-Bit General-Purpose Working Registers
S
Secure MMU for Application Partitioning and IP
Protection
S
Memory Features
48KB Program Flash Memory
512-Byte Sectors
20,000 Erase/Write Cycles per Sector
Masked ROM Available
1.5KB Data SRAM
S
Additional Peripherals
Power-Fail Warning
Power-On Reset (POR)/Brownout Reset
Automatic IR Carrier Frequency Generation and
Modulation
Two 16-Bit Programmable Timers/Counters with
Prescaler and Capture/Compare
One SPI and One USART Port
Programmable Watchdog Timer
8kHz Nanopower Ring Oscillator Wake-Up Timer
Up to 24 General-Purpose I/Os
S
Low Power Consumption
0.2µA (typ), 2.0µA (max) in Stop Mode,
T A = +25NC, Power-Fail Monitor Disabled
3.25mA (typ) at 12MHz in Active Mode
Remote Controls
Battery-Powered
Portable Equipment
Consumer Electronics
Home Appliances
White Goods
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
SPI is a trademark of Motorola, Inc.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, go to:
www.maxim-ic.com/errata .
PART TEMP RANGE
OPERATING
VOLTAGE (V)
PROGRAM
MEMORY (KB)
DATA
MEMORY (KB)
GPIO PIN-PACKAGE
MAXQ613A-0000+ 0NC to +70NC 1.7 to 3.6 48 Flash 1.5 20 32 TQFN-EP*
MAXQ613E-0000+ 0NC to +70NC 1.7 to 3.6 48 Flash 1.5 20 32 LQFP
MAXQ613J-0000+ 0NC to +70NC 1.7 to 3.6 48 Flash 1.5 24 44 TQFN-EP*
MAXQ613K-0000+ 0NC to +70NC 1.7 to 3.6 48 Flash 1.5 24 44 TQFP
MAXQ613X-0000+ 0NC to +70NC 1.7 to 3.6 48 Flash 1.5 24 Bare die