Rainbow Electronics AT90S1200 User Manual

Features, Pin configuration

Advertising
background image

1

Features

Utilizes the AVR

®

RISC Architecture

AVR – High-performance and Low-power RISC Architecture

– 89 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Up to 12 MIPS Throughput at 12 MHz

Data and Non-volatile Program Memory

– 1K Byte of In-System Programmable Flash

Endurance: 1,000 Write/Erase Cycles

– 64 Bytes of In-System Programmable EEPROM

Endurance: 100,000 Write/Erase Cycles

– Programming Lock for Flash Program and EEPROM Data Security

Peripheral Features

– One 8-bit Timer/Counter with Separate Prescaler
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– SPI Serial Interface for In-System Programming

Special Microcontroller Features

– Low-power Idle and Power-down Modes
– External and Internal Interrupt Sources
– Selectable On-chip RC Oscillator for Zero External Components

Specifications

– Low-power, High-speed CMOS Process Technology
– Fully Static Operation

Power Consumption at 4 MHz, 3V, 25

°C

– Active: 2.0 mA
– Idle Mode: 0.4 mA
– Power-down Mode: <1 µA

I/O and Packages

– 15 Programmable I/O Lines
– 20-pin PDIP, SOIC and SSOP

Operating Voltages

– 2.7 - 6.0V (AT90S1200-4)
– 4.0 - 6.0V (AT90S1200-12)

Speed Grades

– 0 - 4 MHz, (AT90S1200-4)
– 0 - 12 MHz, (AT90S1200-12)

Pin Configuration

8-bit
Microcontroller
with 1K Byte
of In-System
Programmable
Flash

AT90S1200

Rev. 0838H–AVR–03/02

Advertising
Table of contents