Rainbow Electronics QIL-A9260-C11 - Manual (Page 3)

S
ECTION
1
1. Introduction
This getting started guide is aimed at helping the reader become familiar with the QIL-
A9260. First, we'll describe how to build the AT91Bootstrap loader, Uboot, and the linux
kernel from the source code. We will see how to generate the root file system from
buildroot. Then we will present you how to make and debug a software application with the
uClibc toolchain. Eventually we will show you how to use the SAM-BA utility which allow
to program the nand flash memory embedded on the QIL-A9260 module.
Datasheet GSG-00006-A01 3/34