Rainbow Electronics AT90SC9618RT User Manual

Features, General, Peripherals

Advertising
background image

6555AS–SPD–15May07

Features

General

High-performance, Low-power secureAVR

RISC Architecture

– 135 Powerful Instructions (Most Executed in a Single Clock Cycle)

Low Power Idle and Power-down Modes

Bond Pad Locations Conforming to ISO 7816-2

ESD Protection to ± 6000V

Operating Ranges: 1.62 to 5.5V

Compliant with GSM, 3GPP and EMV 2000 Specifications; PC Industry Compatible

Available in Wafers, Modules, and Industry-standard Packages

Memory

96K Bytes of ROM Program Memory plus 32KBytes of ROM with specific access

18K Bytes of EEPROM, Including 128 OTP Bytes and 384-byte Bit-addressable Area

– 1 to 64-byte Program / Erase
– 2 ms Program / 2 ms Erase
– Typically More than 500,000 Write/Erase Cycles at a Temperature of 25

o

C

– 10 Years Data Retention

4K Bytes of RAM

Peripherals

One ISO 7816 Controller

– Up to 625 kbps at 5 MHz
– Compliant with T=0 and T=1 Protocols

One I/O Port

Programmable Internal Oscillator (up to 20 MHz for Internal CPU Clock)

Two 16-bit Timers

Random Number Generator (RNG)

2-level, 7-vector Interrupt Controller

Hardware DES and Triple DES DPA Resistant

Checksum Accelerator

CRC 16 & 32 Engine (Compliant with ISO/IEC 3309)

Security

Dedicated Hardware for Protection Against SPA/DPA Attacks

Advanced Protection Against Physical Attack, Including Active Shield

Environmental Protection Systems

Voltage Monitor

Frequency Monitor

Temperature Monitor

Light Protection

Secure Memory Management/Access Protection (Supervisor Mode)

Certification

EAL4+

VISA

CAST

Secure
Microcontroller
for Smart Cards

AT90SC
9618RT
Summary

Note: This is a summary document. A complete document will be
available under NDA. For more information, please contact your
local Atmel sales office.

Advertising