Rainbow Electronics DS3150 - Manual

1 of 22 020602
Note: Some revisions of this device may incorporate deviations from published specifications known
as errata. Multiple revisions of any device may be simultaneously available through various sales
channels. For information about device errata, click here:
http://dbserv.maxim-ic.com/errata.cfm .
FEATURES
Integrated transmit and receive for T3, E3,
and STS-1 line interfaces
Performs clock/data recovery and wave
shaping
Requires no special external components
other than 1:2 transformers
Interfaces to 75
Ω coaxial cable at lengths up
to 380m (T3), 440m (E3), or 360m (STS-1)
Adaptive receive equalizer handles from 0dB
to 15dB of cable loss
Interfaces directly to a DSX monitor signal
(20dB flat loss)
On-chip jitter attenuator can be placed either
in the receive path or the transmit path
Built-in B3ZS and HDB3 coder/decoder
Bipolar and NRZ interfaces
Analog and digital loopbacks
Onboard 2
15 - 1 and 2 23 - 1 Pseudo Random
Bit Sequence (PRBS) generator and detector
Transmit line-driver monitor checks for a
faulty transmitter or a shorted output
Complete T3 AIS generator (ANSI T1.107)
Unframed all ones generator (E3 AIS)
Digital clock inversion capability
Three-state line driver for low-power mode
Loss-of-signal detector (ANSI T1.231-1999
and ITU G.775)
Pin compatible with the TDK 78P7200 and
78P7200L
Drop-in replacement for TDK 78P2241/B
(Refer to Application Note 362)
Low-power 3.3V operation (5V tolerant I/O)
Industrial temperature range: -40
° C to +85 ° C
Small packaging: 28-pin PLCC and
48-pin TQFP
FUNCTIONAL DIAGRAM
ORDERING INFORMATION
DS3150QN 28-Pin PLCC -40 ° C to +85 ° C
DS3150Q 28-Pin PLCC 0 ° C to +70 ° C
DS3150TN 48-Pin TQFP -40 ° C to +85 ° C
DS3150T 48-Pin TQFP 0 ° C to +70 ° C
PRELIMINARY PRELIMINARY
Rx+
Rx-
Tx+
Tx-
RCLK
RPOS
RNE
TCLK
TPOS
TNEG
Line In
T3, E3,
STS-1
Line Out
T3, E3,
STS-1
Receive
Clock and
Data
Transmit
Clock and
Data
DS3150 LIU
DS3150
3.3V T3/E3/STS-1 Line Interface Unit
www.maxim-ic.com