Typical operating characteristics – Rainbow Electronics MAX108 User Manual
Page 6
MAX108
±5V, 1.5Gsps, 8-Bit ADC with
On-Chip 2.2GHz Track/Hold Amplifier
6
_______________________________________________________________________________________
Note 11:
Effective number of bits (ENOB) and signal-to-noise plus distortion (SINAD) are computed from a curve fit referenced to
the theoretical full-scale range.
Note 12:
Total harmonic distortion (THD) is computed from the first five harmonics.
Note 13:
Guaranteed by design with a reset pulse width one clock period long or greater.
Note 14:
Guaranteed by design. The DREADY to DATA propagation delay is measured from the 50% point on the rising edge of the
DREADY signal (when the output data changes) to the 50% point on a data output bit. This places the falling edge of the
DREADY signal in the middle of the data output valid window, within the differences between the DREADY and DATA rise
and fall times, which gives maximum setup and hold time for latching external data latches.
Typical Operating Characteristics
(V
CC
A = V
CC
I = V
CC
D = +5V, V
EE
= -5V, V
CC
O = +3.3V, REFIN connected to REFOUT, f
S
= 1.5Gsps, T
A
= +25°C, unless otherwise
noted.)
6.25
100
2000
1000
EFFECTIVE NUMBER OF BITS
vs. ANALOG INPUT FREQUENCY
(SINGLE-ENDED ANALOG INPUT DRIVE)
6.75
6.50
7.00
7.25
7.50
7.75
8.00
MAX108 toc01
ANALOG INPUT FREQUENCY (MHz)
ENOB (Bits)
10
-1dBFS
-12dBFS
-6dBFS
6.25
100
2000
1000
EFFECTIVE NUMBER OF BITS
vs. ANALOG INPUT FREQUENCY
(DIFFERENTIAL ANALOG INPUT DRIVE)
6.75
6.50
7.00
7.25
7.50
7.75
8.00
MAX108 toc02
ANALOG INPUT FREQUENCY (MHz)
ENOB (Bits)
10
-1dBFS
-12dBFS
-6dBFS
40
100
2000
1000
SIGNAL-TO-NOISE PLUS DISTORTION
vs. ANALOG INPUT FREQUENCY
(SINGLE-ENDED ANALOG INPUT DRIVE)
42
41
43
44
45
46
47
48
49
50
MAX108 toc03
ANALOG INPUT FREQUENCY (MHz)
SINAD (dB)
10
-6dBFS
-1dBFS
-12dBFS
40
100
2000
1000
SIGNAL-TO-NOISE PLUS DISTORTION
vs. ANALOG INPUT FREQUENCY
(DIFFERENTIAL ANALOG INPUT DRIVE)
42
41
43
44
45
46
47
48
49
50
MAX108 toc04
ANALOG INPUT FREQUENCY (MHz)
SINAD (dB)
10
-1dBFS
-12dBFS
-6dBFS
30
100
2000
1000
SIGNAL-TO-NOISE RATIO
vs. ANALOG INPUT FREQUENCY
(SINGLE-ENDED ANALOG INPUT DRIVE)
42
38
34
46
50
MAX108 toc05
ANALOG INPUT FREQUENCY (MHz)
SNR (dB)
10
-1dBFS
-12dBFS
-6dBFS
30
100
2000
1000
SIGNAL-TO-NOISE RATIO
vs. ANALOG INPUT FREQUENCY
(DIFFERENTIAL ANALOG INPUT DRIVE)
42
38
34
46
50
MAX108 toc06
ANALOG INPUT FREQUENCY (MHz)
SNR (dB)
10
-1dBFS
-12dBFS
-6dBFS