Rainbow Electronics MAX2057 User Manual

General description, Applications, Features

Advertising
background image

General Description

The MAX2057 general-purpose, high-performance vari-
able-gain amplifier (VGA) is designed to operate in the
1700MHz to 2500MHz frequency range*. This device
features 15.5dB of gain, 6dB of noise figure, and an out-
put 1dB compression point of 23.8dBm. The MAX2057
also provides an exceptionally high OIP3 level of
37dBm, which is maintained over the entire attenuation
range. In addition, the on-chip analog attenuators yield
infinite control and high attenuation accuracy over
selectable 21dB or 42dB control ranges. Each of these
features makes the MAX2057 an ideal VGA for
DCS/PCS, cdma2000™, W-CDMA, and PHS/PAS trans-
mitter and power amplifier AGC circuits.

The MAX2057 is pin compatible with the MAX2056
800MHz to 1000MHz VGA, making this family of ampli-
fiers ideal for applications where a common PC board
layout is used for both frequency bands.

The MAX2057 operates from a single +5V supply and is
available in a compact 36-pin thin QFN package (6mm
x 6mm x 0.8mm) with an exposed paddle. Electrical
performance is guaranteed over the extended -40°C to
+85°C temperature range.

Applications

DCS 1800/PCS 1900 2G and 2.5G EDGE Base-
Station Transmitters and Power Amplifiers

cdmaOne™, cdma2000, Base-Station
Transmitters and Power Amplifiers

UMTS/W-CDMA and Other 3G Base-Station
Transmitters and Power Amplifiers

PHS/PAS Base-Station Transmitters and Power
Amplifiers

Transmitter Gain Control

Receiver Gain Control

Broadband Systems

Automatic Test Equipment

Digital and Spread-Spectrum Communication
Systems

Microwave Terrestrial Links

cdmaOne is a trademark of CDMA Development Group.
cdma2000 is a registered trademark of Telecommunications
Industry Association.

Features

1700MHz to 2500MHz RF Frequency Range*
37dBm Constant OIP3 (Over All Gain Settings)
23.8dBm Output 1dB Compression Point
15.5dB Typical Gain at Maximum Gain Setting
0.5dB Gain Flatness Over 100MHz Bandwidth
6dB Noise Figure at Maximum Gain Setting (Using

1 Attenuator)

Two Gain-Control Ranges: 21dB and 42dB
Analog Gain Control
Single +5V Supply Voltage
Pin Compatible with MAX2056, 800MHz to

1000MHz RF VGA

External Current-Setting Resistors Provide Option

for Operating VGA in Reduced-Power/Reduced-
Performance Mode

Lead-Free Package Available

*Note: Operation beyond this range is possible, but has not been
characterized.

MAX2057

1700MHz to 2500MHz Variable-Gain

Amplifier with Analog Gain Control

________________________________________________________________ Maxim Integrated Products

1

Ordering Information

19-3510; Rev 0; 1/05

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

EVALUATION KIT

AVAILABLE

PART

TEMP RANGE

PIN-PACKAGE

PKG

CODE

M AX 2057E TX

-40

°C to +85°C

36 Thin QFN-EP**
6mm x 6mm

T3666-2

M AX 2057E TX - T

-40

°C to +85°C

36 Thin QFN-EP**
6mm x 6mm

T3666-2

M AX 2057E TX + D -40

°C to +85°C

36 Thin QFN-EP**
6mm x 6mm

T3666-2

M AX 2057E TX + TD -40

°C to +85°C

36 Thin QFN-EP**
6mm x 6mm

T3666-2

**EP = Exposed paddle.
+ = Lead (Pb) free.
D = Dry pack.
-T = Tape-and-reel package.

Pin Configuration/Functional Diagram appear at end of data
sheet.

Advertising